A thermal testing chamber is a controlled environment chamber designed to simulate various temperature and humidity conditions for testing the performance and durability of products. These laboratory test chambers typically consist of insulated chambers with precision temperature control systems, allowing for the replication of real-world environmental conditions. They are essential for humidity and temperature tests and are widely utilized in industries such as electronics, automotive, aerospace, and pharmaceuticals for quality assurance and reliability testing. The chambers enable thermal shock testing to assess how products withstand rapid changes in temperature, while also facilitating accelerated aging chamber testing to predict long-term performance. This makes them crucial for electronic component testing and material durability testing under different environmental stresses.
Applications
Electronics Industry
Assessing the performance and reliability of electronic components and devices under various temperature and humidity conditions, adhering to the ASTM E104-02 standard.
Testing the effects of temperature and humidity on circuitry, solder joints, and semiconductor materials using advanced environmental testing equipment.
Quality assurance of electronic products to ensure they can withstand environmental stresses encountered during use and storage, including ISO 16750-4 compliance.
Automotive Sector
Evaluating the durability and functionality of automotive components and systems in different climatic conditions with climate test chambers.
Testing the effects of temperature and humidity on materials used in vehicle interiors, exteriors, and under-the-hood components, in accordance with the DIN 50014 climate testing standards.
Quality control of automotive parts to meet industry standards and regulatory requirements for performance and safety, such as ASTM D1776-20 testing.
Aerospace and Defense
Simulating extreme temperature and humidity conditions experienced during aircraft operation and storage with controlled environment chambers.
Testing the reliability of aerospace components, avionics systems, and defense equipment under harsh environmental conditions, including compliance with IEC 60068 environmental testing standards.
Ensuring compliance with stringent aerospace regulations and standards for product reliability and safety.
Pharmaceutical and Biotechnology
Assessing the stability and shelf-life of pharmaceutical drugs and biologics under controlled temperature and humidity conditions using temperature stability chambers.
Testing the effects of environmental factors on the efficacy and integrity of medical products, vaccines, and biological samples to ensure ISO 11133:2014 standard compliance.
Compliance testing to meet regulatory requirements for pharmaceutical product storage and transportation, facilitated by humidity control systems.
| Model | YTS-TH-225 | YTS-TH-500 | YTS-TH-800 | YTS-TH-1000 |
| Interior Volume | 225 Liters | 500 Liters | 800 Liters | 1000 Liters |
| Overall Dimension | 1000x1140x1870 | 1200x1340x2020 | 1300x1540x2120 | 1500x1540x2140 |
| Internal Dimension | 500x600x750 | 700x800x900 | 800x1000x1000 | 1000x1000x1000 |
| Heat Load | 1000 W | |||
| Temperature Deviation | ± 2.0 ℃ | |||
| Temperature Fluctuation | ± 0.5 ℃ | |||
| Temperature Range | A : -20℃ – +150 ℃
B : -40℃ ～ +150 ℃ C: -70℃ ～ +150 ℃ |
|||
| Cooling Rate | 1 ℃ / min | |||
| Safety Device | Dry-combustion protection for humidifiers; safeguard against over-temperature, over-current, and high-pressure of refrigerant; protection from water shortage and earth leakage. | |||
| Thermal Insulation | Insulation cotton, Polyurethane foam | |||
| Exterior Material | Steel Plate with a protective coating | |||
| Controller | Ethernet connection, Programmable color LCD touchscreen controller | |||
| Humidifier | Stainless steel surface evaporation, External isolation | |||
| Water supply system | Water purification system, Automatic water supply | |||
| Standard Configuration | 1 Cable hole with plug | |||
| Humidity Deviation | ± 2.5% RH | |||
| Humidity Range | 20% – 98% RH | |||
| Heating Element | Nichrome heater | |||
| Heating Rate | 3 ℃ / min | |||
| Refrigerating unit | TECUMSEH compressor (French Origin) | |||
| Cooling system | Mechanical compression refrigeration system | |||
- Precise temperature and humidity control for accurate simulation of environmental conditions.
- Programmable control systems for creating customized testing profiles.
- Uniform distribution of temperature and humidity within the chamber to eliminate testing inconsistencies.
- Safety features such as overheat protection and alarm systems to prevent accidents.
- Robust construction and insulation to maintain stability and minimize energy consumption.
- User-friendly interface for easy operation and monitoring of testing parameters.
- Compatibility with various test specimens and accessories for versatile testing applications.
- Shelves and racks for organizing test specimens within the chamber.
- Data logging systems for recording and analyzing test results.
- Viewing windows or cameras for observing test specimens without opening the chamber.
- Lighting systems for visual inspection of test specimens.
- Specimen holders and fixtures for securing test specimens during testing.
- Calibration kits for ensuring the accuracy of temperature and humidity measurements.
- Software for data analysis and report generation.
Secure and Protective Packaging:
- Each item is enveloped in air bubble film before being placed in wooden cases.
- Our packaging offers excellent shock absorption, impact resistance, and heat sealing, while also being non-toxic, odorless, and resistant to moisture corrosion.
Customer Care and Support:
In case you encounter any issues during the testing process, we guarantee a response within 48 hours and a solution within 3 working days. Our support includes:
- Operation video and English manual assistance.
- Video conferencing for remote support.
- On-site service available upon request, with transportation and travel expenses to be covered by the customer.